Have you always wondered how cleverly the rest of the roll a weed joint is?
Do you want to learn the easiest way to roll a joint?
I will be happy to help you and tell you how a newcomer can be introduced easier in this stuff.
Anyway, a joint rolling is the easiest and most economical way of a weed smoking. And if you train a lot, you can do as big joints as Snoop Dog does.
I Want to Roll a Joint: What Does I Need?
A joint rolling is a very simple task and it requires a small investment. Unlike other ways of smoking, this weed includes only a few elements.
So, all you need is:
A prepared weed (grind it before), a paper that will consist of a joint and a paper for a “filter”.
By the way, about the filter. It does not look like ordinary cigarettes have it. You probably noticed that this filter also consists of paper and is folded with an accordion.
The fact is that such a filter does not allow a weed to pass through so that no tiny baby from a bud will be on your lips. But in the presence of such a filter, you breathe deeply.
I have to pay attention to a weed grinding.
Unlike a bowl, you cannot grind a weed too much. In this case, strong grinding will create a lot of resin. In addition, it is too hard to hit in the head and you lose all orientation in space and high.
Choose a rough grinder – this is the best way to make a weed perfect. If you do not have a grinder, then try to grind lightly.
Many people use a sliding napkin to roll a joint quickly. Such a napkin does not help me, so I do not use it.
So, let’s be introduced in the process of rolling.
Easiest way to roll a joint
Paper has several types. I know about three of them: help, rice and wood pulp.
In my opinion, it is a good idea. And a wood pulp paper is not good because it looks like you took a paper from the notebook and start to smoke.
Also, there is a lot of paper sizes from small to the biggest for 5 or even 6 people.
Keep in mind:
You are a newcomer, choose the small one.
Okay, let’s imagine you take a paper is ready. What is the next?
Prepare a weed (not too small)
It is the next very important step. You need to prepare the grass, grind it, but not much. As I said, heavy grinding will work too hard.
Grind the bud using a weed grinder, coffee grinder or any other ways. But remember:
It is better if you grind into a container. This will ensure easier use of the finished product in the future.
Grind the bud into a container and set it aside, we move on to the next step.
Think what will be optimize an air when you will smoke!
If you feel strong enough in yourself, you can immediately roll a joint and do it with a raw end.
Here is another question:
“How are you going to smoke it?”
In my opinion, a joint with a raw end cannot be used in their right mind. You need a filter. I said that the filter should be out of paper.
But this is not the only way. The filter can also be a glass tip that you can use several times.
In fact, these tips are very cool.
You do not need to develop fine motor skills and a few minutes to fold the paper filter every time you want to smoke. And you do not need to torment yourself and smoke a raw joint.
A glass tip will also allow you to create some form of a joint.
If you choose a pulp paper filter, then roll it off first. You can fold the paper in a zigzag or roll.
Two best techniques
When the filter is ready and all other elements of the future joint, too, you need to move on to making a joint.
There are two techniques a weed rolling. In both cases, you need to put the paper on a flat surface, for example, on a table.
Keep in mind:
The adhesive side of the paper should be on the reverse side. You will need this when you tighten a joint. This side is needed for lube and final consolidation.
Then put the filter or tip on the bottom left edge of the paper. And then put a weed along the entire base of the paper. Now I will open a secret.
You already know:
There are two techniques: pinner and cone. The secret is to put a weed in the form of equipment that you choose.
What is the difference?
A pinner works well for one person, and cone can give a strong effect even in a large company.
Then stamp your fingers with an approximate shape. Now the filter and the grass should be in the middle of the paper.
Now take the bottom edge and put it on the filter and weed. Do it right, if it is a pinner and in the form of a cone, if cone. Flick through the paper several times, and then continue to twist.
By the way, I almost forgot:
At the end of the future, the joint should be free space without weed. So, you twist the joint, helping with your fingers and at the end can simply lick the adhesive strip.
When you fold, avoid wrinkles. And if you could not avoid it, then correct it.
It will be easy:
If you hold the side with the filter with one hand and fold the rest with the other hand. You do not want to feel the taste of paper? Reduce the paper and when igniting and smoking you will not feel the taste of paper.
Light it and Smoke, finally
Do not even think about burning a joint when it is in your mouth. In no case, you need to breathe in when you light a joint.
First, light and then inhale.
Do not get any analogies with cigarettes, because a weed joint burns differently.
When you light the end of a joint, be sure to rotate the joint. This will create conditions for slower burning.
Finally, I want to give you one more tip. You might have missed the idea of smoking and not feeling the taste of paper.
I advise you to listen to this.
The smaller the paper, the joint burns slower.